*toggleterm.txt*       For Neovim >= 0.8.0       Last change: 2024 December 27

==============================================================================
Table of Contents                               *toggleterm-table-of-contents*

  - Requirements                                     |toggleterm-requirements|
  - Installation                                     |toggleterm-installation|
  - Notices                                               |toggleterm-notices|
  - Why?                                                     |toggleterm-why?|
  - Roadmap                                               |toggleterm-roadmap|
1. Links                                                    |toggleterm-links|

MULTIPLE ORIENTATIONS ~

- **Float**

- **Vertical**

- **Tab**


SEND COMMANDS TO DIFFERENT TERMINALS ~


WINBAR (EXPERIMENTAL/NIGHTLY ONLY) ~


REQUIREMENTS                                         *toggleterm-requirements*

This plugin only works in _Neovim 0.7_ or newer.


INSTALLATION                                         *toggleterm-installation*

Using packer <https://github.com/wbthomason/packer.nvim> in lua

>lua
    use {"akinsho/toggleterm.nvim", tag = '*', config = function()
      require("toggleterm").setup()
    end}
<

Using lazy.nvim <https://github.com/folke/lazy.nvim> in lua

>lua
    {
      -- amongst your other plugins
      {'akinsho/toggleterm.nvim', version = "*", config = true}
      -- or
      {'akinsho/toggleterm.nvim', version = "*", opts = {--[[ things you want to change go here]]}}
    }
<

Using vim-plug <https://github.com/junegunn/vim-plug> in vimscript

>vim
    Plug 'akinsho/toggleterm.nvim', {'tag' : '*'}
    
    lua require("toggleterm").setup()
<

You can/should specify a tag for the current major version of the plugin, to
avoid breaking changes as this plugin evolves. To use a version of this plugin
compatible with nvim versions less than 0.7 please use the tag `v1.*`.


NOTICES                                                   *toggleterm-notices*

- **28/07/1990** — If using `persist_mode` terminal mappings should be changed to use `wincmd` instead otherwise persist mode will not work correctly. See |toggleterm-here| for details.


WHY?                                                         *toggleterm-why?*

Neovim’s terminal is a very cool, but not super ergonomic tool to use. I find
that I often want to set a process going and leave it to continue to run in the
background. I don’t need to see it all the time. I just need to be able to
refer back to it at intervals. I also sometimes want to create a new terminal
and run a few commands.

Sometimes I want these side by side, and I _really_ want these terminals to be
easy to access. I also want my terminal to look different from non-terminal
buffers, so I use `winhighlight` to darken them based on the `Normal`
background colour.

This is the exact use case this was designed for. If that’s your use case
this might work for you.


ROADMAP                                                   *toggleterm-roadmap*

All I really want this plugin to be is what I described above. A wrapper around
the terminal functionality.

It basically (almost) does all that I need it to.

I won’t be turning this into a REPL plugin or doing a bunch of complex stuff.
If you find any issues, _please_ consider a _pull request_ not an issue. I’m
also going to be pretty conservative about what I add.


SETUP ~

This plugin must be explicitly enabled by using `require("toggleterm").setup{}`

Setting the `open_mapping` key to use for toggling the terminal(s) will set up
mappings for _normal_ mode. The `open_mapping` can be a key string or an array
of key strings. If you prefix the mapping with a number that particular
terminal will be opened. Otherwise if a prefix is not set, then the last
toggled terminal will be opened. In case there are multiple terminals opened
they’ll all be closed, and on the next mapping key they’ll be restored.

If you set the `insert_mappings` key to `true`, the mapping will also take
effect in insert mode; similarly setting `terminal_mappings` to `true` will
have the mappings take effect in the opened terminal.

However you will not be able to use a count with the open mapping in terminal
and insert modes. You can create buffer specific mappings to exit terminal mode
and then use a count with the open mapping. Check _Terminal window mappings_
for an example of how to do this.

alternatively you can do this manually (not recommended but, your prerogative)

>vim
    " set
    autocmd TermEnter term://*toggleterm#*
          \ tnoremap <silent><c-t> <Cmd>exe v:count1 . "ToggleTerm"<CR>
    
    " By applying the mappings this way you can pass a count to your
    " mapping to open a specific window.
    " For example: 2<C-t> will open terminal 2
    nnoremap <silent><c-t> <Cmd>exe v:count1 . "ToggleTerm"<CR>
    inoremap <silent><c-t> <Esc><Cmd>exe v:count1 . "ToggleTerm"<CR>
<

**NOTE**Please ensure you have set `hidden` in your neovim config, otherwise
the terminals will be discarded when closed.

**WARNING**Please do not copy and paste this configuration! It is here to show
what options are available. It is not written to be used as is.

>lua
    require("toggleterm").setup{
      -- size can be a number or function which is passed the current terminal
      size = 20 | function(term)
        if term.direction == "horizontal" then
          return 15
        elseif term.direction == "vertical" then
          return vim.o.columns * 0.4
        end
      end,
      open_mapping = [[<c-\>]], -- or { [[<c-\>]], [[<c-¥>]] } if you also use a Japanese keyboard.
      on_create = fun(t: Terminal), -- function to run when the terminal is first created
      on_open = fun(t: Terminal), -- function to run when the terminal opens
      on_close = fun(t: Terminal), -- function to run when the terminal closes
      on_stdout = fun(t: Terminal, job: number, data: string[], name: string) -- callback for processing output on stdout
      on_stderr = fun(t: Terminal, job: number, data: string[], name: string) -- callback for processing output on stderr
      on_exit = fun(t: Terminal, job: number, exit_code: number, name: string) -- function to run when terminal process exits
      hide_numbers = true, -- hide the number column in toggleterm buffers
      shade_filetypes = {},
      autochdir = false, -- when neovim changes it current directory the terminal will change it's own when next it's opened
      highlights = {
        -- highlights which map to a highlight group name and a table of it's values
        -- NOTE: this is only a subset of values, any group placed here will be set for the terminal window split
        Normal = {
          guibg = "<VALUE-HERE>",
        },
        NormalFloat = {
          link = 'Normal'
        },
        FloatBorder = {
          guifg = "<VALUE-HERE>",
          guibg = "<VALUE-HERE>",
        },
      },
      shade_terminals = true, -- NOTE: this option takes priority over highlights specified so if you specify Normal highlights you should set this to false
      shading_factor = '<number>', -- the percentage by which to lighten dark terminal background, default: -30
      shading_ratio = '<number>', -- the ratio of shading factor for light/dark terminal background, default: -3
      start_in_insert = true,
      insert_mappings = true, -- whether or not the open mapping applies in insert mode
      terminal_mappings = true, -- whether or not the open mapping applies in the opened terminals
      persist_size = true,
      persist_mode = true, -- if set to true (default) the previous terminal mode will be remembered
      direction = 'vertical' | 'horizontal' | 'tab' | 'float',
      close_on_exit = true, -- close the terminal window when the process exits
      clear_env = false, -- use only environmental variables from `env`, passed to jobstart()
       -- Change the default shell. Can be a string or a function returning a string
      shell = vim.o.shell,
      auto_scroll = true, -- automatically scroll to the bottom on terminal output
      -- This field is only relevant if direction is set to 'float'
      float_opts = {
        -- The border key is *almost* the same as 'nvim_open_win'
        -- see :h nvim_open_win for details on borders however
        -- the 'curved' border is a custom border type
        -- not natively supported but implemented in this plugin.
        border = 'single' | 'double' | 'shadow' | 'curved' | ... other options supported by win open
        -- like `size`, width, height, row, and col can be a number or function which is passed the current terminal
        width = <value>,
        height = <value>,
        row = <value>,
        col = <value>,
        winblend = 3,
        zindex = <value>,
        title_pos = 'left' | 'center' | 'right', position of the title of the floating window
      },
      winbar = {
        enabled = false,
        name_formatter = function(term) --  term: Terminal
          return term.name
        end
      },
      responsiveness = {
        -- breakpoint in terms of `vim.o.columns` at which terminals will start to stack on top of each other
        -- instead of next to each other
        -- default = 0 which means the feature is turned off
        horizontal_breakpoint = 135,
      }
    }
<


USAGE ~


TOGGLETERM ~

This is the command the mappings call under the hood. You can use it directly
and prefix it with a count to target a specific terminal. This function also
takes arguments `size`, `dir`, `direction` and `name`. e.g.

>vim
    :ToggleTerm size=40 dir=~/Desktop direction=horizontal name=desktop
<

If `dir` is specified on creation toggle term will open at the specified
directory. If the terminal has already been opened at a particular directory it
will remain in that directory.

The directory can also be specified as `git_dir` which toggleterm will then use
to try and derive the git repo directory. _NOTE_This will not work for
`git-worktrees` or other more complex setups.

If `size` is specified, and the command opens a split (horizontal/vertical)
terminal, the height/width of all terminals in the same direction will be
changed to `size`.

If `direction` is specified, and the command opens a terminal, the terminal
will be changed to the specified direction.

If `name` is specified, the display name is set for the toggled terminal. This
name will be visible when using `TermSelect` command to indicate the specific
terminal.

`size` and `direction` are ignored if the command closes a terminal.


CAVEATS

- Having multiple terminals with different directions open at the same time is unsupported.


TOGGLETERMTOGGLEALL ~

This command allows you to open all the previously toggled terminal in one go
or close all the open terminals at once.


TERMEXEC ~

This command allows you to open a terminal with a specific action.
e.g. `2TermExec cmd="git status" dir=~/<my-repo-path>` will run git status in
terminal 2. note that the `cmd` argument **must be quoted**.

_NOTE:_ the `dir` argument can also be _optionally_ quoted if it contains
spaces.

The `cmd` and `dir` arguments can also expand the same special keywords as
|expand| e.g. `TermExec cmd="echo %"` will be expanded to `TermExec cmd="echo
/file/example"`

These special keywords can be escaped using the `\` character, if you want to
print character as is.

The `size`, `direction` and `name` arguments are like the `size`, `direction`
and `name` arguments of `ToggleTerm`.

By default, focus is returned to the original window after executing the
command (except for floating terminals). Use argument `go_back=0` to disable
this behaviour.

You can send commands to a terminal without opening its window by using the
`open=0` argument.

see |expand()| for more details


TERMSELECT ~

This command uses `vim.ui.select` to allow a user to select a terminal to open
or to focus it if it’s already open. This can be useful if you have a lot of
terminals and want to open a specific one.


SENDING LINES TO THE TERMINAL ~

You can "send lines" to the toggled terminals with the following commands:

- `:ToggleTermSendCurrentLine <T_ID>`sends the whole line where you are standing with your cursor
- `:ToggleTermSendVisualLines <T_ID>`sends all the (whole) lines in your visual selection
- `:ToggleTermSendVisualSelection <T_ID>`sends only the visually selected text (this can be a block of text or a selection in a single line)

(`<T_ID` is an optional terminal ID parameter, which defines where should we
send the lines. If the parameter is not provided, then the default is the
`first terminal`)

Alternatively, for more fine-grained control and use in mappings, in lua:

>lua
    local trim_spaces = true
    vim.keymap.set("v", "<space>s", function()
        require("toggleterm").send_lines_to_terminal("single_line", trim_spaces, { args = vim.v.count })
    end)
        -- Replace with these for the other two options
        -- require("toggleterm").send_lines_to_terminal("visual_lines", trim_spaces, { args = vim.v.count })
        -- require("toggleterm").send_lines_to_terminal("visual_selection", trim_spaces, { args = vim.v.count })
    
    -- For use as an operator map:
    -- Send motion to terminal
    vim.keymap.set("n", [[<leader><c-\>]], function()
      set_opfunc(function(motion_type)
        require("toggleterm").send_lines_to_terminal(motion_type, false, { args = vim.v.count })
      end)
      vim.api.nvim_feedkeys("g@", "n", false)
    end)
    -- Double the command to send line to terminal
    vim.keymap.set("n", [[<leader><c-\><c-\>]], function()
      set_opfunc(function(motion_type)
        require("toggleterm").send_lines_to_terminal(motion_type, false, { args = vim.v.count })
      end)
      vim.api.nvim_feedkeys("g@_", "n", false)
    end)
    -- Send whole file
    vim.keymap.set("n", [[<leader><leader><c-\>]], function()
      set_opfunc(function(motion_type)
        require("toggleterm").send_lines_to_terminal(motion_type, false, { args = vim.v.count })
      end)
      vim.api.nvim_feedkeys("ggg@G''", "n", false)
    end)
<

Set `trim_spaces=false` for sending to REPLs for whitespace-sensitive languages
like python. (For python, you probably want to start ipython with `ipython
--no-autoindent`.)


TOGGLETERMSETNAME ~

This function allows setting a display name for a terminal. This name is
primarily used inside the winbar, and can be a more descriptive way to
remember, which terminal is for what.

You can map this to a key and call it with a count, which will then prompt you
a name for the terminal with the matching ID. Alternatively you can call it
with just the name e.g. `:ToggleTermSetName work<CR>` this will the prompt you
for which terminal it should apply to. Lastly you can call it without any
arguments, and it will prompt you for which terminal it should apply to then
prompt you for the name to use.


SET TERMINAL SHADING ~

This plugin automatically shades terminal filetypes to be darker than other
window you can disable this by setting `shade_terminals = false` in the setup
object

>lua
    require'toggleterm'.setup {
      shade_terminals = false
    }
<

alternatively you can set, _which_ filetypes should be shaded by setting

>lua
    -- fzf is just an example
    require'toggleterm'.setup {
      shade_filetypes = { "none", "fzf" }
    }
<

setting `"none"` will allow normal terminal buffers to be highlighted.


SET PERSISTENT SIZE ~

By default, this plugin will persist the size of horizontal and vertical
terminals. Split terminals in the same direction always have the same size. You
can disable this behaviour by setting `persist_size = false` in the setup
object. Disabling this behaviour forces the opening terminal size to the `size`
defined in the setup object.

>lua
    require'toggleterm'.setup{
      persist_size = false
    }
<


TERMINAL WINDOW MAPPINGS ~

It can be helpful to add mappings to make moving in and out of a terminal
easier once toggled, whilst still keeping it open.

>lua
    function _G.set_terminal_keymaps()
      local opts = {buffer = 0}
      vim.keymap.set('t', '<esc>', [[<C-\><C-n>]], opts)
      vim.keymap.set('t', 'jk', [[<C-\><C-n>]], opts)
      vim.keymap.set('t', '<C-h>', [[<Cmd>wincmd h<CR>]], opts)
      vim.keymap.set('t', '<C-j>', [[<Cmd>wincmd j<CR>]], opts)
      vim.keymap.set('t', '<C-k>', [[<Cmd>wincmd k<CR>]], opts)
      vim.keymap.set('t', '<C-l>', [[<Cmd>wincmd l<CR>]], opts)
      vim.keymap.set('t', '<C-w>', [[<C-\><C-n><C-w>]], opts)
    end
    
    -- if you only want these mappings for toggle term use term://*toggleterm#* instead
    vim.cmd('autocmd! TermOpen term://* lua set_terminal_keymaps()')
<


CUSTOM TERMINALS ~

_using lazygit_

Toggleterm also exposes the `Terminal` class so that this can be used to create
custom terminals for showing terminal UIs like `lazygit`, `htop` etc.

Each terminal can take the following arguments:

>lua
    Terminal:new {
      cmd = string -- command to execute when creating the terminal e.g. 'top'
      display_name = string -- the name of the terminal
      direction = string -- the layout for the terminal, same as the main config options
      dir = string -- the directory for the terminal
      close_on_exit = bool -- close the terminal window when the process exits
      highlights = table -- a table with highlights
      env = table -- key:value table with environmental variables passed to jobstart()
      clear_env = bool -- use only environmental variables from `env`, passed to jobstart()
      on_open = fun(t: Terminal) -- function to run when the terminal opens
      on_close = fun(t: Terminal) -- function to run when the terminal closes
      auto_scroll = boolean -- automatically scroll to the bottom on terminal output
      -- callbacks for processing the output
      on_stdout = fun(t: Terminal, job: number, data: string[], name: string) -- callback for processing output on stdout
      on_stderr = fun(t: Terminal, job: number, data: string[], name: string) -- callback for processing output on stderr
      on_exit = fun(t: Terminal, job: number, exit_code: number, name: string) -- function to run when terminal process exits
    }
<

If you want to spawn a custom terminal without running any command, you can
omit the `cmd` option.


CUSTOM TERMINAL USAGE

>lua
    local Terminal  = require('toggleterm.terminal').Terminal
    local lazygit = Terminal:new({ cmd = "lazygit", hidden = true })
    
    function _lazygit_toggle()
      lazygit:toggle()
    end
    
    vim.api.nvim_set_keymap("n", "<leader>g", "<cmd>lua _lazygit_toggle()<CR>", {noremap = true, silent = true})
<

This will create a new terminal, but the specified command is not being run
immediately. The command will run once the terminal is opened. Alternatively
`term:spawn()` can be used to start the command in a background buffer without
opening a terminal window yet. If the `hidden` key is set to true, this
terminal will not be toggled by normal toggleterm commands such as
`:ToggleTerm` or the open mapping. It will only open and close by using the
returned terminal object. A mapping for toggling the terminal can be set as in
the example above.

Alternatively the terminal can be specified with a count, which is the number
that can be used to trigger this specific terminal. This can then be triggered
using the current count e.g. `:5ToggleTerm<CR>`

>lua
    local lazygit = Terminal:new({ cmd = "lazygit", count = 5 })
<

You can also set a custom layout for a terminal.

>lua
    local lazygit = Terminal:new({
      cmd = "lazygit",
      dir = "git_dir",
      direction = "float",
      float_opts = {
        border = "double",
      },
      -- function to run on opening the terminal
      on_open = function(term)
        vim.cmd("startinsert!")
        vim.api.nvim_buf_set_keymap(term.bufnr, "n", "q", "<cmd>close<CR>", {noremap = true, silent = true})
      end,
      -- function to run on closing the terminal
      on_close = function(term)
        vim.cmd("startinsert!")
      end,
    })
    
    function _lazygit_toggle()
      lazygit:toggle()
    end
    
    vim.api.nvim_set_keymap("n", "<leader>g", "<cmd>lua _lazygit_toggle()<CR>", {noremap = true, silent = true})
<

**WARNING**do not use any of the private functionality of the terminal or other
non-public parts of the API as these can change in the future.


STATUSLINE ~

To tell each terminal apart you can use the terminal buffer variable
`b:toggle_number` in your statusline

>vim
    " this is pseudo code
    let statusline .= '%{&ft == "toggleterm" ? "terminal (".b:toggle_number.")" : ""}'
<


CUSTOM COMMANDS ~

You can create your own commands by using the lua functions this plugin
provides directly

>vim
    command! -count=1 TermGitPush  lua require'toggleterm'.exec("git push",    <count>, 12)
    command! -count=1 TermGitPushF lua require'toggleterm'.exec("git push -f", <count>, 12)
<


OPEN MULTIPLE TERMINALS SIDE-BY-SIDE ~

  Direction    Supported
  ------------ -----------
  vertical     
  horizontal   
  tab          
  float        
Inyour first terminal, you need to leave the `TERMINAL` mode using C-\C-N which
can be remapped to Esc for ease of use.

Then you type on: `2<C-\>`, and the result:

Explain:

- `2`this is the terminal’s number (or ID), your first terminal is `1` (e.g. your 3rd terminal will be `3<C-\>`, so on).
- C-\this is the combined key mapping to the command `:ToggleTerm`.


FAQ ~


HOW DO I GET THIS PLUGIN TO WORK WITH POWERSHELL?

Please check out the Wiki section on this topic
<https://github.com/akinsho/toggleterm.nvim/wiki/Tips-and-Tricks#using-toggleterm-with-powershell>.

==============================================================================
1. Links                                                    *toggleterm-links*

1. *lazy git*: https://user-images.githubusercontent.com/22454918/116447435-e69f1480-a84f-11eb-86dd-19fa29646aa1.png
2. *image*: https://user-images.githubusercontent.com/31947091/133395516-22fef1e6-633d-4964-9175-f76fabf66794.png
3. *image*: https://user-images.githubusercontent.com/31947091/133396789-fdf68b30-3a8c-440b-822f-6549f282c4fc.png

Generated by panvimdoc <https://github.com/kdheepak/panvimdoc>

vim:tw=78:ts=8:noet:ft=help:norl:
